Cocopeat and chips for anthurium
Anthurium roots need very good aeration, so growers use coco chips with a smaller share of pith, often 50:50 or chip-led. The medium should drain quickly and hold a pH near 5.5 to 6.0.
- anthurium coco
- anthurium chips
Blend
A chip-led mix gives high air-filled porosity, with pith added for water retention. Beds, pots and bags are all used. Mixed media may include perlite or bark.
Irrigation
Frequent, light irrigation suits chip-heavy media. Monitor drain EC to avoid salt build-up between flushes.
Supply
Order washed, graded chips with stated EC. Greenmark Exports supplies chip blocks and pith blocks that you can blend on site.
| Parameter | Typical range |
|---|---|
| Blend | 50:50 to chip-led |
| pH | 5.5 to 6.0 |
| Chip size | 8 to 15 mm |
Key takeaways
- A chip-led mix gives high air-filled porosity, with pith added for water retention.
- Frequent, light irrigation suits chip-heavy media.
- Order washed, graded chips with stated EC.
Trial a sample slab or bag with your own water supply before you buy a container.
Need a specification or a quote? Send your requirement or message us on WhatsApp.
Questions and answers
What mix for anthurium?
A chip-led mix of coco chips and pith, such as 50:50 or more chips, depending on irrigation.
What pH for anthurium?
About 5.5 to 6.0 in the medium.
Do anthuriums need perlite?
Not always. Chips alone often provide enough aeration, though some growers add perlite.
Related pages
- Husk Chip BlocksCompressed 5 kg blocks of coir husk chips for drainage, aeration and orchid or anthurium media.
- Coco husk chips for orchidsOrchids need an open, fast-draining medium, so growers use washed coco husk chips of about 8 to 25 mm, alone or blended with...
- Cocopeat for roses and cut flowersCut-flower growers use coir slabs, bags and pots because the medium is consistent, rewettable and low in pathogens. Roses and...
- Cocopeat for greenhouse tomatoGreenhouse tomato growers use buffered or low EC cocopeat in slabs of about 100 cm length, planted through pre-cut holes and...
Sources and further reading
Ready to source from India?
Tell us the product, quantity and destination port. We reply with a specification sheet and a quotation.