GST, IEC and Udyam registered exporter · Mumbai, India+91 77388 20834 · exports@greenmarkexports.in
Answer

What is EC in cocopeat?

Quick answer

EC, or electrical conductivity, measures the soluble salt in a cocopeat sample in millisiemens per centimetre. A low EC under 0.5 mS/cm means few soluble salts, which is safe for seedlings and hydroponic crops, while high EC above 1.0 means unwashed pith.

By Greenmark Exports, Mumbai · Updated 2026-11-18

  • cocopeat EC
  • low EC coco peat

Why it matters

Salt around roots draws water out and can scorch seedlings. Soilless growers also need a clean baseline so their feed recipe works.

Method matters

EC depends on the extraction ratio, such as 1:1.5 volume or 1:5 weight, so always ask for the method.

Typical grades

Low EC below 0.5 mS/cm, medium 0.5 to 1.0, high above 1.0. Buffered grades have been treated as well as washed.

GradeEC (mS/cm)
Low ECBelow 0.5
Medium0.5 to 1.0
High ECAbove 1.0

Key takeaways

  • Salt around roots draws water out and can scorch seedlings.
  • EC depends on the extraction ratio, such as 1:1.5 volume or 1:5 weight, so always ask for the method.
  • Low EC below 0.5 mS/cm, medium 0.5 to 1.0, high above 1.0.

Before you order, ask your supplier to state EC, pH and moisture with the test method, and to send a sample from the actual production lot.

Need a specification or a quote? Send your requirement or message us on WhatsApp.

Questions and answers

What is a good EC for cocopeat?

For hydroponics and seedlings, below 0.5 mS/cm.

Does EC change after hydration?

The reading is on a standard extract, and in the crop it changes with feed and uptake.

Sources and further reading

Ready to source from India?

Tell us the product, quantity and destination port. We reply with a specification sheet and a quotation.

Request a quoteWhatsApp