How to hydrate a cocopeat block
To hydrate a 5 kg cocopeat block, place it in a tub and add 20 to 25 litres of water slowly, wait 15 to 30 minutes until it fully expands, then break it up by hand. One block gives about 70 to 75 litres of moist medium.
- hydrate coco block
Water volume
Use about 4 to 5 litres of water per kilo of block. Add in stages so the block swells evenly.
Time
Most blocks expand within half an hour, and larger blocks may take longer.
After hydration
Break up lumps, fluff the medium and check EC and pH before filling bags.
Key takeaways
- Use about 4 to 5 litres of water per kilo of block.
- Most blocks expand within half an hour, and larger blocks may take longer.
- Break up lumps, fluff the medium and check EC and pH before filling bags.
Before you order, ask your supplier to state EC, pH and moisture with the test method, and to send a sample from the actual production lot.
Need a specification or a quote? Send your requirement or message us on WhatsApp.
Questions and answers
How much water for a 650 g brick?
About 3 to 4 litres, making 8 to 9 litres of medium.
Can I hydrate with nutrient solution?
Yes, many growers pre-wet with a diluted feed.
Related pages
- How many litres in a 5 kg cocopeat block?A 5 kg cocopeat block typically expands to between 65 and 80 litres, with finer grades near 70 to 75 and lofty cut-fibre mixes...
- Cocopeat 5 kg BlocksCompressed 5 kg coir pith blocks in washed low EC, buffered and unwashed high EC grades.
- Cocopeat 650 g BriquettesRetail-size coco coir bricks that expand to 8 to 9 litres, ready for private-label wrapping.
- What is cocopeat?Cocopeat, also called coco peat, coir pith or coco coir, is the fine, spongy material left after the long fibre is removed...
Sources and further reading
Ready to source from India?
Tell us the product, quantity and destination port. We reply with a specification sheet and a quotation.