Cocopeat pH level
Cocopeat usually has a pH between 5.5 and 6.5, which is close to the best range for most plants in soilless culture. Growers manage the root-zone pH mostly through the pH of the irrigation water and feed.
- coco peat pH
Why pH matters
pH controls nutrient availability. Outside the range, iron or phosphorus may lock out.
Adjusting
Adjust feed pH rather than the medium. Blueberries want a lower pH than vegetables.
Measuring
Measure the drain, not just the feed, to see what roots experience.
Key takeaways
- pH controls nutrient availability.
- Adjust feed pH rather than the medium.
- Measure the drain, not just the feed, to see what roots experience.
Before you order, ask your supplier to state EC, pH and moisture with the test method, and to send a sample from the actual production lot.
Need a specification or a quote? Send your requirement or message us on WhatsApp.
Questions and answers
Is pH 5.5 right for coco?
Yes, many growers feed at 5.5 to 6.0.
Does pH change in coir?
It drifts with feed and root activity, so monitor drain.
Related pages
- What is EC in cocopeat?EC, or electrical conductivity, measures the soluble salt in a cocopeat sample in millisiemens per centimetre. A low EC under...
- Cocopeat for blueberrySubstrate blueberry production uses large bags of 25, 30 or 40 litres filled with coir or coir and chip blends. The crop wants...
- Cocopeat for greenhouse tomatoGreenhouse tomato growers use buffered or low EC cocopeat in slabs of about 100 cm length, planted through pre-cut holes and...
- What is cocopeat?Cocopeat, also called coco peat, coir pith or coco coir, is the fine, spongy material left after the long fibre is removed...
Sources and further reading
Ready to source from India?
Tell us the product, quantity and destination port. We reply with a specification sheet and a quotation.