GST, IEC and Udyam registered exporter · Mumbai, India+91 77388 20834 · exports@greenmarkexports.in
Answer

How to test cocopeat EC and pH

Quick answer

To test cocopeat, mix one part hydrated cocopeat with 1.5 parts distilled water by volume, stir, let it stand 30 minutes and read EC and pH with a calibrated meter. Compare the result with the supplier's batch report using the same method.

By Greenmark Exports, Mumbai · Updated 2026-11-18

  • test cocopeat EC
  • coco peat pH test

Sampling

Take samples from several blocks across the shipment, not just one. Mix them and hydrate.

Extraction

Use distilled water and a fixed ratio. Filter or let settle, and measure the liquid.

Calibration

Calibrate the meter with standard solutions. Record temperature, as EC varies with it.

Disputes

If results differ, agree on a third-party laboratory and method in the contract.

Key takeaways

  • Take samples from several blocks across the shipment, not just one.
  • Use distilled water and a fixed ratio.
  • Calibrate the meter with standard solutions.
  • If results differ, agree on a third-party laboratory and method in the contract.

Before you order, ask your supplier to state EC, pH and moisture with the test method, and to send a sample from the actual production lot.

Need a specification or a quote? Send your requirement or message us on WhatsApp.

Questions and answers

What ratio should I use?

Whatever your contract states, commonly 1:1.5 by volume.

How many samples?

Several blocks per lot is a sensible minimum.

Sources and further reading

Ready to source from India?

Tell us the product, quantity and destination port. We reply with a specification sheet and a quotation.

Request a quoteWhatsApp